9. Name: Ford. Ford Model: Focus. Ford Year: 2004. UK/Ireland Location: Lancashire. Posted May 28, 2016. Hi, I'm looking for advice or a tutorial on the replacment of the steel rear brake lines my Mk1 1.6 Zetec failed the MOT. In the tutorial I've seen, he seeks to replace the complete line from master cylinder to the rearmost rubber hose using
Can anyone she'd light on this , again it's a 2006 1.6 zetec with about 60000 miles Mondeo Zetec S 130 Td ci Done so Far_ Black Eyes, Auto dip mirror, New front x-drilled and grooved discs, blank'd EGR. leather gear gaitor with colour coded stitching, aero flat wiper blades, Led side lights, Xenon Bulbs, Smoke repeaters.
Ford Focus 1.6 Zetec, already required a new engine (now done, at great expense). Somehow during the engine changeover, the ECU appears to have failed (garage say no idea why but have put their hands up, it may be something they've done). Just interested in an idea of cost of replacement ECU.
It's called the 2012 Ford Focus Zetec S. Where the real ST will use a 250-horsepower, 2.0-liter four, the Zetec S has a 180-horse, 1.6-liter motor. Both come mated to six-speed manual
Shame about the missed purchase!.. The 182ps 1.6 Ecoboost Focus do seem to be quite rare. I found mine on Autotrader a few weeks ago and snapped it up as it had only done 13k miles for just over £10K which was a bargain I think. Through a Bristol Street dealer near me.
First thing is remove the 2 nuts that have the arrows off the studs. 18mm. Then remove the 3 bolts labeled with the the red X. 15mm. Then slide the motor mount up and put it someplace safe. Get the Torx E10 socket and remove the 2 studs circles in red.
The Ford Focus 1.6 Zetec-SE is a hatchback with 5 doors and a front mounted engine which delivers the power to the front wheels. It's powered courtesy of a naturally aspirated engine of 1.6 litre capacity. This unit features double overhead camshaft valve gear, 4 cylinder layout, and 4 valves per cylinder.
Information concerning engine/transmission removal and refitting, and engine overhaul, can be found in Part D of this Chapter, which also includes the Specifications relevant to those procedures. General description - Zetec engine The Zetec engine, (formerly Zeta), is of sixteen-valve, double overhead camshaft (DOHC), four-cylinder, in-line
posted on 19/1/06 at 09:23 PM. Zetec Engine identification. I have Zetec which im trying to identify. I bought what I thought was a 1.8Zetec with a Aluminium top marked DOHC 16V. Stamped on the block low down on the exhaust site at the rear is NBO 4481. Its badly stamped and uneven. I also have in the cast above the water pump on the Exhaust side. I have a ford focus zetec 1.6 T reg. Been away for 4 weeks and car has been stilling on the drive during this time. Now the focus doesn’t drive the way it should. Fuel consumption has gone up and the engine feels gutless below 3000rpm. Sometimes when I cold start the car, there is a slight smell of petrol in the air (this has only happen twice). Ford Model: Focus Mk1. Ford Year: 2002. UK/Ireland Location: Peeblesshire. Posted February 14, 2021. Hi, i have a mk1 focus with the 1.6 zetec-se gas engine and i've stumbled across an issue with the acceleration - while reving between 2000 to 3000 rpm the engine won't hold the rpm, it will reach it then slowly drop even though i'm holding the
I bought a new Focus 2.0 Liters last year. It came with a Zetec-E engine as per Owner´s manual. It's output is 130 HP. It has always been said here that Zetec engine was a design from Yamaha. From 2006 onwards Ford Argentina is producing Focus with two engines, both Duratec 1.6 L with an output of 103 HP and a 2.0 L with an output of 145 HP.
The 4347 kit provides the main camshaft and crankshaft locking tools for both the belt and chain driven derivatives of these engines from the 1.25L to 2.3L engine variants. This new camshaft setting bar updates the existing Laser kit 3096 and is suitable for all the same applications. Also included in the kit is 303-748 (21-259) for Focus, C
18. Name: Michael. Ford Model: focus Zetec. Ford Year: 2010. UK/Ireland Location: Greater Manchester. Posted April 1, 2019. Unable to find any evidence of cam belt change on my focus, and at now nine years old it needs doing. Am I right in believing that this engine is non interference, and should not suffer catastrophic damage if the belt
